|
Post by Frank on May 15, 2008 21:23:42 GMT -6
looks verryy niiiccee Brady! is it ready to be dropped in?
|
|
|
Post by chile on May 15, 2008 21:46:06 GMT -6
I just need some minor stuff on the motor and she will be ready. I also need to finish the wiring in the engine bay and need to insulate the turbo.
|
|
|
Post by Frank on May 16, 2008 5:51:00 GMT -6
so it should be kickin' by mid next week? dont forget those fan bracket spacers tambien that you were showing me
|
|
|
Post by TexasG8 on May 16, 2008 7:09:14 GMT -6
|
|
|
Post by chile on May 16, 2008 8:34:57 GMT -6
Rusty I'm gona check home depot I belive I saw something like that.I need to create a little punch list so I won't forget anything.And yes Frank hopefully it will be in by mid next week.
|
|
|
Post by Texas6 on May 16, 2008 14:21:58 GMT -6
Rusty I'm gona check home depot I belive I saw something like that.I need to create a little punch list so I won't forget anything.And yes Frank hopefully it will be in by mid next week. Good luck with you're set up!
|
|
|
Post by TexasG8 on May 17, 2008 17:19:37 GMT -6
|
|
|
Post by Frank on May 17, 2008 17:36:36 GMT -6
i think i'm wet. Brady, I got the breather yesterday and i'll give you a call later on so I can return the one you lent me. Thanks man.
|
|
|
Post by chile on May 18, 2008 13:21:39 GMT -6
I know what you mean Rusty,I didn't think I could pull it off but I did. I just hope I don't have any leaks.
Frank,just give me a call when your in the area.
|
|
|
Post by chile on May 19, 2008 19:47:56 GMT -6
|
|
|
Post by Frank on May 20, 2008 15:10:33 GMT -6
port'em
|
|
|
Post by Texas6 on May 20, 2008 21:09:58 GMT -6
Nizzzzzze! Good job brady.
|
|
|
Post by chile on May 20, 2008 21:37:37 GMT -6
Thank you Hey guys I would recommend that with in time you guys think off purchasing a wideband so what happen to me won't happen to you.
|
|
|
Post by TexasG8 on May 21, 2008 7:10:22 GMT -6
Just because you did not have a wideband is not why you chipped your pistons. 400whp on a motor with 135,000 miles is why you chipped a piston. But take your advise and buy a wideband Brady so we can tune your car for the right AFR.
|
|
|
Post by chile on May 21, 2008 9:39:27 GMT -6
Trust me I plan on buying one this time around,but you can never tell how your car is running around with this dam heat. I mean you can't be tuning it every single day the weather changes.
|
|
|
Post by TexasG8 on May 21, 2008 10:08:39 GMT -6
You can that is the good thing about having a ICCU. You can make little changes here and there for the weather and still keep your original tune of the car.
|
|
|
Post by chile on May 21, 2008 10:45:01 GMT -6
Thats were the wideband comes in I belive.Were you notice the difference on your O2's,then you use your ICCU.Am I correct? ? That night I believe that If I had a wideband I would of noticed my motor leaned out.but then again I should of checked for loose bolts on the upper intake.Don't get me wrong I have no regrets.
|
|
|
Post by TexasG8 on May 21, 2008 11:59:46 GMT -6
Just because you had some loose bolts on the blower casing does not mean that your car was running lean. With a big vacuum leak you would of felt the car running like shit and it would of had a hard time idling.
|
|
|
Post by Frank on May 21, 2008 12:05:06 GMT -6
what caused the car to lean out?
|
|
|
Post by chile on May 21, 2008 14:40:25 GMT -6
So then what do you think went wrong? ?
|
|